1. Slip the bearing over the edge of the damper at the bearing line.
2. Lay the assembly on any firm surface and rap the prong with a hammer. One blow drives the prong through the damper blade, holding it securely to the damper.
3. When hit with a hammer, the prong will automatically form up tight by the anvil, which is built into the bottom of the "Rapit" Bearing.
|Weight||10 Pounds (lbs)|
|Width||7 Inches (In)|
|Height||11 Inches (In)|
|Country of Origin||USA|
|Length||13 Inches (In)|
|Size||1" x 2.218" x .468"|