Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

8" 200MM 120 Volt 2322/2781 RPM 476/538 CFM Inline Mixed Flow Duct Fan

Item: TD-200
MFR: TD-200

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info

Description

Compact Size-TD Fans require minimum space: The S&P TD-MIXVENT & TD-SILENT series of in-line duct fans have been specially designed to
maximize the airflow performance with minimal noise levels within the smallest and most compact of housing sizes. This makes the TD-MIXVENT & TD-SILENT series the ultimate solution for small to
medium sized ventilation installations which require a high airflow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cabinets and many other limited space environments.
All the models in the TD-MIXVENT & TD-SILENT range have been designed with the professional contractor/engineer in mind. All models include a "removable body" feature that enables the motor-impeller assembly to be completely removed or replaced without the need tointerfere with the attached ducting.
All models within the TD-MIXVENT & TD-SILENT range incorporate a powerful mixed flow impeller and internal air vanes located at the discharge end of the fan housing. This impeller and guide vane
combination provides a smooth laminar air flow which in turn minimizes turbulence and noise, and generates an excellent air flow to pressure performance ratio. All of the TD-fans include the combination of a powerful motor, factory installed, to a mixed flow impeller.
This motor and impeller combination enables the TD-fans to deliver high airflow performances with minimum noise generation against high static pressures typically found in ducted ventilation systems. The unique design of the support brackets, allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting and therefore, facilitating any installation or maintenance. The internal aerodynamic design of the TD-MIXVENT & TD-SILENT fans enable the units to generate large air volumes and pressures with
the minimum of in-duct or radiated noise. As an additional standard advantage, TDMIXVENT fans are fitted with a direct connection two-speed motor. The TD-fans offer the ideal in-line duct fan solution for a wide range of HVAC ventilation applications.
Range: The TD-MIXVENT series consists of seven (7) nominal sized in-line fans. All models are specifically designed for direct connection in-line with industry standard diameter round ducting.

Construction: The TD-MIXVENT models 100, 100x, 125,150, and 200 are manufactured in tough reinforced plastic, models 250 and 315 have a metal casing and are finished in a tough epoxy-polyester paint coating. The TD fan duct connection flanges are manufactured from reinforced plastic, except for models 200, 250 and 315 which are constructed from epoxy-polyester coated metal.

Impellers: The impeller blades for models 100, 100x, 125, 150 and 200 are molded in tough ABS plastic. Models 250 and 315 are metal.

Motors:
Models 100, 100x and 125: Single-phase, 120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All motors include direct two speed connection and are also suitable for voltage speed control.
Class ll electrical insulation (model 100) & Class l (models 100x and 125)
IP 44 Protection
Class B Motor Insulation
Safety auto reset Thermal Overload Protection (fuse type)
Self-lubricating sleeve bearings.
Suitable for working airstreams up to 104° F (40°C).
Models 150, 200, 250 and 315:
Single-phase induction asynchronous motor, with permanent capacitor and external rotor constructed of die cast aluminum. Models 150, 200 and 315 include direct two speed connection and are also suitable for voltage speed control.
Class I electrical insulation
IP 44 Protection
Thermal Overload Protection
Class B Motor Insulation
Sealed For Life, ball bearings Suitable for working airstreams up to 140° F (60°C).

Specifications

Weight13 Pounds (lbs)
Width14 Inches (In)
Height14 Inches (In)
Country of OriginESP
Length14 Inches (In)
ApprovalsAMCA Air, ENERGY STAR Qualified, cULus
Bearing TypeBall
Blade MaterialMetal
BrandS&P
CFM538
ColorWhite
Comments/NotesCFM - Dependent on choosing Low Speed or High Speed
CommercialYes
CUL RecognizedYes
Cycle/Hertz50,60
Duct Size8"
Green Certification or Other RecognitionENERGY STAR and NGBS Green Certified
Housing MaterialPlastic
IncludesIntegral mounting bracket
ISO CodeES
Maximum Ambient Temperature140°F (60°C)
Motor InsulationClass B
Mounting LocationInline
PhaseSingle
Propeller Diameter8"
ResidentialYes
RPM2322,2.781
Speed2
Thermal ProtectionYes
UL RecognizedYes
Voltage120 VAC
Watts139-184
Wheel MaterialMetal
Wheel TypeMixed Flow

Documents

Equipment Part List

Loading...