Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
EasyStock

Bryant® Legacy™ 95% AFUE 60000 Btuh Single Stage 4-Way Multipoise ECM Condensing Gas Furnace

Item: 915SB42060E17
MFR: 915SB42060E17

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info

Description

Bryant® Legacy™ 95% AFUE 60000 Btuh Single Stage 4-Way Multipoise ECM Condensing Gas Furnace

The 915SB Multipoise Condensing Gas Furnace features the single-stage Legacy™ System. The fixed-speed, constant torque (FCT) ECM blower motor is at the heart of the electrical efficiency provided by this furnace. With an Annual Fuel Utilization Efficiency (AFUE) of up to 96.2%, this furnace provides added savings over standard gas furnaces. The Legacy Gas Furnace features 4-way multipoise installation flexibility, and is available in ten model sizes. All sizes except the 26,000 BTUH model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUH model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. A Bryant Legacy Control and Legacy Air Conditioner or Heat Pump, can be used to form a complete Legacy Line System. All sizes are design certified in Canada. Specific sizes are design certified for use in Manufactured Housing (Mobile Home) applications when used with factory-approved MH accessory kit.

PERFORMANCE
  • Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
  • Single-speed inducer motor, and single-stage gas valve
  • Silicon Nitride Power Heat™ Hot Surface Igniter.
  • Adjustable blower speed for heating and cooling.
  • Aluminized-steel primary heat exchanger.
  • Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
  • 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow and optional through-the-cabinet downflow venting capability.
  • Factory-configured ready for upflow applications.
  • Ideal height 35" (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
  • Two-pipe venting, single-pipe venting or ventilated combustion air.
APPLICATIONS
  • Approved for Twinning applications with accessory kit (42060E17 through 60100E21 models, only).
  • Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. (30040E14 through 66120E24 models, only).
  • Propane convertible with gas conversion accessory kit.
CERTIFICATIONS
  • All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193.
  • All sizes meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

Specifications

Weight138.5 Pounds (lbs)
Width17.5 Inches (In)
Height35 Inches (In)
Country of OriginUSA
Length29.5 Inches (In)
AFUE95%,96%
Air FlowMulti-Position
Blower Motor HP3/4 HP
Blower Motor RPM400-1200
Blower Motor Speeds5
Blower Motor TypeECM
Blower Wheel11" x 8"
BrandBryant
BTU Input60000
BTU Output58000
CFM1010
ColorGray
Cycle/Hertz60 Hz
FER CompliantYes
Fuel TypeNatural Gas (Factory Installed) or LP Convertible
Full Load Amps8.8
Gas ConnectionNPT
Ignition TypeSilicon Nitride
Maximum Fuse Size15
PhaseSingle
Product Family915S
Prop 65Yes
StageSingle
Voltage115 VAC
Warranty OfferedYes

Documents

Equipment Part List

Loading...