Factory-Applied Edge Coating
Edge coating is factory applied to the edges of the liner core, ensuring coverage of the leading edges per NAIMA/SMACNA requirements. Shop fabrication cuts may be coated with SuperSeal® edge treatment (refer to publication AHS-202).
Duct Liner PM is specifically designed for lining sheet metal ducts in air conditioning, heating and ventilating systems, providing superior acoustical and thermal performance.
Improves Indoor Building Environment. Duct Liner PM improves indoor environmental quality by helping to control both temperature and sound.
Will Not Support Microbial Growth. The airstream surface of Duct Liner PM is treated with an antimicrobial agent specifically registered with the EPA for HVAC applications to resist potential growth of fungus or bacteria on the airstream surface.
Duct Liner PM duct liner meets all requirements for fungi and bacterial resistance. Tests were conducted in accordance with ASTM C1338 and ASTM G21 (fungi testing) and ASTM G22 (bacteria resistance testing). Detailed information is available in Johns Manville fact sheet HSE-103FS.
Note: As with any type of surface, microbial growth may occur in accumulated duct system dirt, given certain conditions. This risk is minimized with proper design, filtration, maintenance and operation of the HVAC system.
Cleanability. If HVAC system cleaning is required, the airstream surface may be cleaned with industry-recognized dry methods. See the North American Insulation Manufacturers Association (NAIMA) “Cleaning Fibrous Glass Insulated Air Duct Systems.”
|Weight||47.94 Pounds (lbs)|
|Width||28 Inches (In)|
|Height||60 Inches (In)|
|Country of Origin||USA|
|Length||28 Inches (In)|
|Application||duct liner, acoustical|
|Noise Reduction Coefficient (NRC)||0.95|
|Resistances||Conductance = 0.13|
|Size||2" x 59" x 50'|
|Temperature Range||40°F to 250°F (4.4°C to 121.1°C)|
|Tier||DUCT LINER PM|