Micro-Lok HP Fiber Glass Pipe Insulation is a high-performance insulation made from rotary glass fibers bonded with a thermosetting resin and produced in 36" (0.92 m) lengths. Micro-Lok HP insulation is used to insulate standard iron pipe and copper tubing. The 3' (0.92 m) sections are available plain or with a factory-applied vapor-barrier jacket. The all-service (ASJ) vapor-retarder jacket includes a longitudinal, self-sealing closure lap. The jacket system is adhered to each fiber glass section using a specially formulated adhesive to ensure jacket securement. Latex paint may be applied to the Micro-Lok HP jacket after installation.
The factory-installed tape system permits installation at ambient temperatures down to 20°F (-7°C) and will not soften or separate when exposed to high ambient temperatures and humidity.
Micro-Lok HP fiber glass pipe insulation is suitable for installation over hot, cold, concealed and exposed piping systems with operating temperatures up to 850°F (454°C). Weather-protective jacketing is required for outdoor applications. Pipes operating below ambient temperatures require all joints to be sealed with the factory-applied, self-seal lap and butt strips.
|Weight||8.55 Pounds (lbs)|
|Width||2.5 Inches (In)|
|Height||12 Inches (In)|
|Country of Origin||USA|
|Length||24 Inches (In)|
|Application||PVC fitting or part|
|Insulation Nominal I.D.||12"|
|Iron Pipe Nominal Size||12"|
|LEED Rating||Not rated|
|R-Value||None Provided by Manufacturer|
|Temperature Range||0°F to 150°F (-17.7°C to 65.5°C)|
|Wall Thickness||2 1/2"|