Micro-Lok HP Fiber Glass Pipe Insulation is a high-performance
insulation made from rotary glass fibers bonded with a thermosetting
resin and produced in 36" (0.92 m) lengths. Micro-Lok HP insulation is
used to insulate standard iron pipe and copper tubing. The 3'
(0.92 m) sections are available plain or with a factory-applied
vapor-barrier jacket. The all-service (ASJ) vapor-retarder jacket includes a longitudinal, self-sealing closure lap. The jacket system
is adhered to each fiber glass section using a specially formulated
adhesive to ensure jacket securement. Latex paint may be applied
to the Micro-Lok HP jacket after installation.
The factory-installed tape system permits installation at ambient
temperatures down to 20°F (-7°C) and will not soften or separate
when exposed to high ambient temperatures and humidity.
Micro-Lok HP fiber glass pipe insulation is suitable for installation
over hot, cold, concealed and exposed piping systems with
operating temperatures up to 850°F (454°C). Weather-protective
jacketing is required for outdoor applications. Pipes operating
below ambient temperatures require all joints to be sealed withthe factory-applied, self-seal lap and butt strips.
|Weight||4.085 Pounds (lbs)|
|Width||1 Inches (In)|
|Height||20 Inches (In)|
|Country of Origin||USA|
|Length||24 Inches (In)|
|Insulation Nominal I.D.||20"|
|Iron Pipe Nominal Size||20"|
|Resistances||K = 0.23|
|Temperature Range||0°F to 850°F (-17.7°C to 454.4°C)|