Factory Authorized Parts™ - HC38GR239 Condenser Motor 1/5 HP 208/230 V 0.50 Amp 1100/900 RPM

Frequently Bought Together

All Products

About This Product

Product Info

Description

When looking for replacement motors, look no further than our Factory Authorized Parts (FAP)! FAP are designed to meet exact Carrier® Corporation specifications, ensuring optimum system performance, proven reliability, easy installation and maintenance and safe system operation.

FAP Features

Improved Efficiency - Motor runs at most efficient portion of motor performance curve by design
Ensures motor is not overloaded
Ensures that motor operates at the design RPM, which produces the correct airflow
Reduced System Vibration - System design put motor RPM at optimal point for limiting torque pulsations that can generate excess vibration in the unit
Reduced Noise - System qualification includes additional testing such as start/stop and pure tone noise identification which further ensures there is not excessive vibration or noise during unit operation.
Overall length of motor assures that fan is located at intended position to minimize sound and maximize airflow
Reduced stress on components
Natural frequencies of the top system are determined through design process.
Motor operating frequencies are designed away from these resonances
Reduced wear on system
Motors tested to Temprise standard, stricter than required by UL 1995.
Motors must meet maximum winding temperatures required by UL at higher ambient and wider voltage ranges (RES-SPL-CQR-0012A)
Stringent design-life testing provides longer life 100,000 on/off cycles and 50,000 total running hours; 15 years.
Reliability Testing Regimen - Each motor chassis design goes through internal and supplier testing including salt spray, torture, life, and operational envelope testing. (CC14BD002 and Alternating Current Fan Motor Standard)
Raceway Connections - FAP motors have liquid tight connector for lead exit that connects to raceway.
Wire Terminations and Lengths - Wire terminations are the same as production motors so no termination is necessary. Wire lengths reach required end points without alteration.
Fewer On-site Modifications required - Fan guards and top covers are designed to accept FAP motors without modification.
Exact size fit means easiest access.
Few Hardware issues - Hardware used to mount and secure original motor can be used to mount replacement motor UL & CSA Qualified Both the CBP unit and the FAP motor are UL & CSA qualified. Using the FAP motor maintains UL & CSA qualification of the equipment

Specifications

Weight	11.1 Pounds (lbs)
Width	5.7 Inches (In)
Height	8 Inches (In)
Country of Origin	MEX
Length	5.5 Inches (In)
Application	Provides exact drop-in replacement
Bearing Type	Ball
Brand	RCD Parts
Comments/Notes	Meets exact design specifications for optimum system performance
CSA Listing	Yes
Cycle/Hertz	60 Hz
Full Load Amps	0.5
Insulation Class	Class B
Motor HP	1/5 HP
Motor Type	ECM
NEMA Frame	48
Phase	Single
Prop 65	No
Ratings	Maintains agency listings and safety standards
Rotation	Clockwise
RPM	900,1.1
Shaft Diameter	1/2"
Shaft Length	2"
Voltage	187-254 VAC
Warranty Offered	Yes

Replacement For

Item: HC38GR235
Item: HC38GE235
Item: HC38GE238
Item: HC38GE233
Item: HC38GE234
Item: HC38GE221
Item: HC38GE237
Item: HC38GE220

Your Account

Create An Account

Your Lists

Delivery & Pickup