Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
Homans Pay

Reznor® V3 Series Model UDAP gas-fired unit heater 225,000 Btu

Item: UDAP225
MFR: UDAP225

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info

Description

Power Vented, Low Static Axial Fan Commercial/Industrial Unit Heaters. Reznor® V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA). Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection. The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
STANDARD FEATURES
Sizes 30-400 certified for commercial/industrial heating application
Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
82-83% Thermal efficient
50-60°F Rise range
Tcore2 titanium stabilized aluminized steel heat exchanger
Patented A single burner combustion system including a one-piece burner assembly
115/1/60 Supply voltage
115 Volt open fan motor with internal overload protection
Transformer for 24-volt controls
Integrated circuit board with diagnostic indicator lights
Multi-try direct spark ignition with timed lockout
Fan relay (included on the circuit board)
Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation )
Vibration/noise isolated fan and venter motors ~ designed for low noise operation
2-pt and 4-pt Suspension ~ standard on all sizes
External terminal strip for 24-volt wiring
External gas connection
Full fan guard ~ engineered for safety
Improved cabinet design with less visible hardware
Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B) Two-stage natural gas or propane gas valve - Sizes 60-400
409 or 316 Stainless steel heat exchangers
Totally enclosed fan motor (Sizes 30-250, 115V only)
Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)
Sizes 30-125 carry an additional approval for use in residential garage/workshops under CSA International Requirement10.96 - U.S. and CR96-0005 - Canada

Specifications

Weight203 Pounds (lbs)
Width42 Inches (In)
Height26 Inches (In)
Country of OriginMEX
Length38 Inches (In)
AFUE83%
Air FlowHorizontal
ApprovalsCSA International Requirement 10.96 - U.S. and CR96-0005 - Canada
BrandReznor
BTU Input225000
BTU Output186750
CertificationsCSA Design Certified (ANSI Z83.8b),CSA Certified (CSA 2.6b)
CFM2882
ColorWhite, Red, Black
Connection Size3/8"
Connection TypeThreaded
CSA CertifiedYes
Cycle/Hertz60
Energy Star RatedNo
Flue Size6"
Full Load Amps7.5
Gas Connection3/4" [19.05 mm] N.P.T.
Gas TypeNatural - Propane
Heat Exchanger TypeTitanium Stabilized Aluminzed Steel
Ignition TypeDirect Spark
ISO CodeMX
Motor HP1/4 HP
PhaseSingle
RPM1050
Sound Level (dBA)56
TierUDAP
UL ListedNo
UL RecognizedNo
Voltage115 VAC
Warranty OfferedYes

Equipment Part List

Loading...