These zone dampers are the latest in design and were developed to fit field requirements for a variety of duct work shapes and sizes. These dampers use 24 VAC direct drive actuators for smooth, quiet performance. There is a 1/2 in. direct-drive mounting hub for securing the damper blade and shaft to the actuator housing. A position indicator and angular rotation stop for viewing or manually setting minimum maximum damper positions facilitate ease of installation. A spring loaded disengagement button to momentarily release main gear and damper blade allows for manual positioning of installed dampers. The damper motor and terminal block wiring are protected by a plastic cover with a removable door. Permanently lubricated bushings, with a split shaft design for round and rectangular style dampers, secure the damper blade to the shaft for efficient reliable service.
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
6 Pounds (lbs)
8 Inches (In)
14 Inches (In)
Country of Origin
8 Inches (In)
1/2-in. Direct Drive Mounting Hub; Position Indicator and Angular Rotation; Spring Loaded Disengagement Button; Plastic Covered Damper motor and Terminal Block wiring with a Removable Door; Permanently lubricated bushings with a split shaft design